Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Interior Section: Interior Panels/Trim
Model Year: 2008 Model: Sequoia Doc ID: RM000002VHR004X
Title: INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 Sequoia)

INSTALLATION

1. INSTALL NO. 1 INSTRUMENT PANEL PIN



(a) Install the 2 instrument panel pins with the 2 <G> screws.

2. INSTALL AUTOMATIC LIGHT CONTROL SENSOR



(a) Engage the 2 claws and install the automatic light control sensor.

3. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY SUPPLEMENTAL RESTRAINT SYSTEMS: FRONT PASSENGER AIRBAG ASSEMBLY: INSTALLATION (2008 Sequoia)+

4. INSTALL NO. 2 INSTRUMENT PANEL WIRE

(a) Engage the clamps and install the instrument panel wire.

(b) Connect the 2 connectors.

5. INSTALL NAVIGATION ANTENNA ASSEMBLY NAVIGATION / MULTI INFO DISPLAY: NAVIGATION ANTENNA: INSTALLATION (2008 Sequoia)+

6. INSTALL ACCESSORY METER ASSEMBLY



(a) Install the accessory meter with the 3 screws.

7. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY



(a) Install the register with the 3 <G> screws.

8. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY



(a) Install the register with the 3 <G> screws.

9. INSTALL DEFROSTER NOZZLE ASSEMBLY



(a) Install the defroster nozzle with the 3 <G> screws.

10. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT



(a) Engage the 2 claws and install the duct.

(b) Install the 2 <G> screws.

11. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT



(a) Engage the 2 claws and install the duct.

(b) Install the 2 <G> screws.

12. INSTALL NO. 1 HEATER TO REGISTER DUCT

(a) Install the duct with the 5 <G> screws.

(b) Engage the clamp.

13. INSTALL GLOVE BOX LIGHT ASSEMBLY



(a) Engage the 2 claws to install the glove box light.

14. INSTALL NO. 3 INSTRUMENT PANEL STAY

(a) Engage the 5 claws to install the 5 stays.

15. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY (for 8 Speakers)

(a) Engage the 5 claws to install the instrument panel.



(b) Install the 3 <C> bolts and 2 <E> nuts.

(c) Install the 2 <F> passenger airbag bolts.

Torque: 20 N·m (204 kgf·cm, 15 ft·lbf)



(d) Connect the connectors and engage the clamps.

(e) Install the wire harness with the bolt.

Torque: 8.4 N·m (86 kgf·cm, 74 in·lbf)




(f) Connect the airbag connector.

16. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY (for 14 Speakers)

(a) Engage the 5 claws to install the instrument panel.



(b) Install the 3 <C> bolts and 2 <E> nuts.

(c) Install the 2 <F> passenger airbag bolts.

Torque: 20 N·m (204 kgf·cm, 15 ft·lbf)



(d) Connect the connectors and engage the clamps.

(e) Install the wire harness with the bolt.

Torque: 8.4 N·m (86 kgf·cm, 74 in·lbf)




(f) Connect the airbag connector.

17. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD INSERT



(a) Connect the connector and engage the clamp.

(b) Engage the 2 claws to install the safety pad insert.

(c) Install the 4 <A> bolts.

18. INSTALL REAR NO. 4 AIR DUCT (for 14 Speakers) HEATING / AIR CONDITIONING: FRONT AIR CONDITIONING UNIT: INSTALLATION (2008 Sequoia)+

19. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY (for 14 Speakers) AUDIO / VIDEO: STEREO COMPONENT AMPLIFIER: INSTALLATION (2008 Sequoia)+

20. INSTALL AUDIO AMPLIFIER COVER (for 14 Speakers) AUDIO / VIDEO: STEREO COMPONENT AMPLIFIER: INSTALLATION (2008 Sequoia)+

21. INSTALL FRONT RH SEAT ASSEMBLY (for 14 Speakers) SEAT: FRONT SEAT ASSEMBLY (for Power Seat): INSTALLATION (2008 Sequoia)+

22. INSTALL SEAT TRACK OUTER COVER RH (for 14 Speakers) SEAT: FRONT SEAT ASSEMBLY (for Power Seat): INSTALLATION (2008 Sequoia)+

23. INSTALL SEAT TRACK INNER COVER RH (for 14 Speakers) SEAT: FRONT SEAT ASSEMBLY (for Power Seat): INSTALLATION (2008 Sequoia)+

24. INSTALL FRONT SEAT HEADREST ASSEMBLY (for 14 Speakers)

25. INSTALL FRONT NO. 4 SPEAKER ASSEMBLY (for 14 Speakers) AUDIO / VIDEO: INSTRUMENT PANEL SPEAKER: INSTALLATION (2008 Sequoia)+

26. INSTALL NO. 3 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY



(a) Engage the 6 clips and 2 claws to install the speaker panel.

27. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY RH AUDIO / VIDEO: INSTRUMENT PANEL SPEAKER: INSTALLATION (2008 Sequoia)+

28. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY



(a) Engage the 4 clips and claw install the speaker panel.

29. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY LH AUDIO / VIDEO: INSTRUMENT PANEL SPEAKER: INSTALLATION (2008 Sequoia)+

30. INSTALL INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY



(a) Engage the 4 clips and claw and install the speaker panel.

31. INSTALL NO. 2 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY

(a) Engage the clip and install the box door.

(b) Install the 6 <B> screws.

32. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH

(a) Engage the 4 claws and install the finish panel.

(b) Install the 3 <D> screws and bolt <A>.

33. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY



(a) Engage the 2 guides and 4 claws and install the under cover.

34. INSTALL FRONT PILLAR GARNISH RH INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION (2008 Sequoia)+

35. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

(a) Install the front door opening trim weatherstrip RH.

36. INSTALL COWL SIDE TRIM BOARD RH INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION (2008 Sequoia)+

37. INSTALL FRONT DOOR SCUFF PLATE RH INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION (2008 Sequoia)+

38. INSTALL INSTRUMENT SIDE PANEL RH

(a) Engage the 3 guides and 3 claws and install the side panel.

39. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System) NAVIGATION / MULTI INFO DISPLAY: NAVIGATION RECEIVER: INSTALLATION (2008 Sequoia)+

40. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver) AUDIO / VIDEO: RADIO RECEIVER: INSTALLATION (2008 Sequoia)+

41. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY HEATING / AIR CONDITIONING: AIR CONDITIONING PANEL: INSTALLATION (2008 Sequoia)+

42. INSTALL CENTER LOWER INSTRUMENT PANEL FINISH PANEL

(a) Connect the connectors.

(b) Engage the 4 clips and 2 claws and install the finish panel.

43. INSTALL COMBINATION METER ASSEMBLY METER / GAUGE / DISPLAY: COMBINATION METER: INSTALLATION (2008 Sequoia)+

44. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY



(a) Engage the 12 clips and install the finish panel.

(b) Connect the 2 connectors and clamp.

(c) Engage the 4 claws and install the instrument panel finish panel retainer.

45. INSTALL FRONT CONSOLE BOX INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: INSTALLATION (2008 Sequoia)+

46. INSTALL REAR CONSOLE BOX ASSEMBLY INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: INSTALLATION (2008 Sequoia)+

47. INSTALL CONSOLE BOX CARPET INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: INSTALLATION (2008 Sequoia)+

48. INSTALL REAR CONSOLE BOX POCKET INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: INSTALLATION (2008 Sequoia)+

49. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: INSTALLATION (2008 Sequoia)+

50. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: INSTALLATION (2008 Sequoia)+

51. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: INSTALLATION (2008 Sequoia)+

52. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH



(a) Engage the 2 claws and install the sensor.

(b) Connect the connectors.

(c) Engage the 4 clips and claw and install the finish panel.

(d) Install the 2 <A> bolts.

53. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY DOOR / HATCH: HOOD LOCK CONTROL CABLE ASSEMBLY: INSTALLATION (2008 Sequoia)+

54. INSTALL INSTRUMENT SIDE PANEL LH

(a) Engage the 4 guides and 3 claws and install the side panel.

55. INSTALL FRONT PILLAR GARNISH LH INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION (2008 Sequoia)+

56. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

(a) Install the front door opening trim weatherstrip LH.

57. INSTALL COWL SIDE TRIM BOARD LH INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION (2008 Sequoia)+

58. INSTALL FRONT DOOR SCUFF PLATE LH INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION (2008 Sequoia)+

59. INSTALL TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY STEERING COLUMN: STEERING COLUMN ASSEMBLY (for Manual Tilt and Manual Telescopic Steering Column): INSTALLATION (2008 Sequoia)+

60. INSTALL UPPER STEERING COLUMN COVER STEERING COLUMN: STEERING COLUMN ASSEMBLY (for Manual Tilt and Manual Telescopic Steering Column): INSTALLATION (2008 Sequoia)+

61. INSTALL LOWER STEERING COLUMN COVER STEERING COLUMN: STEERING COLUMN ASSEMBLY (for Manual Tilt and Manual Telescopic Steering Column): INSTALLATION (2008 Sequoia)+

62. INSTALL STEERING WHEEL ASSEMBLY STEERING COLUMN: STEERING WHEEL: INSTALLATION (2008 Sequoia)+

63. INSTALL STEERING PAD SUPPLEMENTAL RESTRAINT SYSTEMS: STEERING PAD: INSTALLATION (2008 Sequoia)+

64. INSTALL LOWER NO. 3 STEERING WHEEL COVER SUPPLEMENTAL RESTRAINT SYSTEMS: STEERING PAD: INSTALLATION (2008 Sequoia)+

65. INSTALL LOWER NO. 2 STEERING WHEEL COVER SUPPLEMENTAL RESTRAINT SYSTEMS: STEERING PAD: INSTALLATION (2008 Sequoia)+

66. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable some systems need to be initialized after the cable is reconnected INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION (2008 Sequoia) .

Torque: 5.4 N·m (55 kgf·cm, 48 in·lbf)

67. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: DIAGNOSIS SYSTEM (2008 Sequoia) .